Advertisement
Configure the following management tools outside the NSF 4.2.3 software:
• SmartDashboard™
• SmartView Tracker™
• SmartView Status™
4. Notes for Upgrade
File Names for This Release
File Name
NSF_Director_4.2.3.0_R60.iso
(based on R60 + HFA-06)
NSF_Director_4.2.3.0_R65.iso
(based on R65 + HFA_02)
NSF_Director_4.2.3.0_R60.iso
NSF_Director_4.2.3.0_R65.iso
5. Version of Previous Release
Software version 4.2.2, Release date - June 2008
6. Compatibility
N/A
7. Changes in This Release
Problems resolved in this release: 4.2.3
Q01865541
©2007-2008 Nortel Networks Limited
.iso (contains .img and .pkg files)
File Name
Link goes down when the speed of the dual ports is set to 1000Mbps with the
following configuration – "Autoneg" is ON, "preferred" set to copper and "backup"
set as fiber. The same issue does not occur when the preferred is set to fiber and the
backup to copper. Also the issue is not seen with dedicated fiber ports. The issue is
resolved in the release 4.2.3 by not using the manual port settings when autoneg is
set to ON.
Module Or File
.iso (contains .img and .pkg files)
addeb8c04f4a4fab92d5796720a19b19
4454600114eb0485b1135c0c47c2c3a8
Type File
Size(K.B)
355663872
486965248
MD5 Checksum
3
Advertisement
