Mazda MX-5 2024 Owner's Manual page 66

Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
How to Use the ISOFIX
Lower Anchor (Mexico)
1. Open the convertible top.
2. Make sure the ignition is switched
off.
3. Slide the passenger seat as far back
*1
as possible.
Refer to How to Use the Front Seats
on page 3-27.
* 1 You may need to move the seat
forward slightly and recline the
back of the seat, in order to
assist in the fitment of some
child-restraint systems.
4. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
5. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the ISOFIX
lower anchor.
NOTE
The markings above the ISOFIX
lower anchors indicate the
locations of the ISOFIX lower
anchors for the attachment of a
child-restraint system.
6. Secure the child-restraint system
using the ISOFIX lower anchor,
following the child-restraint system
manufacturer's instruction.
3-44
MX-5_8ME4-EA-23L_Edition1_new
7. Switch the ignition ON and make
sure the passenger air bag
deactivation OFF indicator light
illuminates after installing a
child-restraint system on the
passenger seat.
If the passenger air bag
deactivation OFF indicator light
does not illuminate, remove the
child-restraint system, switch the
ignition to OFF, and then re-install
the child-restraint system (page
3-15).
8. If your child-restraint system came
equipped with a tether, that
probably means it is very important
to properly secure the tether for
child safety. Please carefully follow
the child-restraint system
manufacturer's instructions when
installing tethers (page 3-41).
2023-8-31 16:47:34