Mazda MX-5 2024 Owner's Manual page 239

NOTE
If any of the following conditions is

met, the forward detection function
may not operate normally.
The Forward Sensing Camera (FSC)

cannot detect target objects.
Refer to Forward Sensing Camera
(FSC) on page 5-90.
When there is the possibility of a

partial contact with a target object.
The driver deliberately performs

driving operations (accelerator
pedal operation, steering wheel
operation, selector lever/shift lever
operation, and turn signal lever
operation).
If any of the following conditions is

met, the forward detection function
may operate.
An animal or object on the road is

detected.
Passing an approaching vehicle

while rounding a curve.
Vehicle is passing through a narrow

gate or a gate with a low ceiling.
There is a metal object, bump, or a

protruding object on the road.
When the forward detection function

performs brake control and the
vehicle is stopped, the brakes are
automatically released after about 2
seconds if the driver does not
depress the brake pedal.
(Manual transmission vehicle)

When the forward detection function
performs brake control and the
vehicle is stopped, the engine stops
if the driver does not depress the
clutch pedal.
The operation distance and volume

of the collision warning can be
changed.
Set in the Mazda Connect "Settings"
or consult an Authorized Mazda
Dealer.
MX-5_8ME4-EA-23L_Edition1_new
Smart Brake Support (SBS)
Turning off the SBS
The SBS can be turned off using the
Mazda Connect.
Set in the Mazda Connect "Settings" or
consult an Authorized Mazda Dealer.
When the SBS is turned off, the SBS
OFF indicator turns on.
Driving
5-131
2023-8-31 16:47:34