Mazda MX-5 2024 Owner's Manual page 363

3. Turn the L-shaped hexagonal
wrench (Large) counterclockwise to
loosen the bolt slightly.
4. Remove the L-shaped hexagonal
wrench (Large) once from the bolt,
then insert the long end of the
wrench into the bolt.
NOTE
The tip of the long end of the
L-shaped hexagonal wrench can be
used at an angle. Moving the
wrench upward slightly will increase
the clearance between the rear roof
and the stored front roof and
facilitate the procedure.
5. Turn the L-shaped hexagonal
wrench (Large) counterclockwise
MX-5_8ME4-EA-23L_Edition1_new
When the Roof Cannot be Closed
13 times or more while pressing the
wrench against the bolt.
NOTE
The bolt cannot be removed

completely.
If it is hard to turn the bolt, repeat

Step 3 a few times.
6. Hook the wire to the link pin shown
in the figure.
What to Do in Case of Emergency
8-39
2023-8-31 16:47:34