Mazda MX-5 2024 Owner's Manual page 64

Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
How to Use the Anchor
Bracket (Mexico)
1. Open the convertible top.
2. Slide the passenger seat as far back
as possible and then slide it forward
about 10 notches (100 mm) so that
your hand can be placed behind it
(page 3-27).
3. Remove the cover.
4. Place the child-restraint on the
passenger seat.
5. Pass the tether strap under the head
restraint and install it to the tether
anchor.
For the tether strap adjustment
method, refer to the child-restraint
seat manufacturer's instructions.
3-42
MX-5_8ME4-EA-23L_Edition1_new
How to Use the Seat Belt
(Mexico)
When installing a child-restraint
system, follow the installation
instructions included with the product.
Also, open the convertible top and
slide the seat as far back as possible,
fold down the seatback as far as
possible.
When installing the child-restraint
system, if the seat belt is loose and
cannot be secured, adjust the forward
and back/up and down positions of
the seat where the child-restraint
system is installed, or slide the
child-restraint system to the left or right
so that there is no slack in the seat
belt.
2023-8-31 16:47:34