Mazda MX-5 2024 Owner's Manual page 59

Child-Restraint System Suitability for Various Seat
(Mexico)
Provided information in the table shows your child-restraint system suitability for
various seating position. For installation suitability of other manufacturer
child-restraint system, carefully consult the manufacturer's instructions which
accompany the child-restraint system.
When installing a child-restraint system, the following points must be observed:
When installing a child-restraint system to the passenger seat, adjust the seat slide

position as far back as possible.
Refer to How to Use the Seats on page 3-27.
When it is difficult to install a child-restraint system to the passenger seat, or the

seat belt cannot be secured to the child-restraint system, perform the following
operations to adjust the seat holding the child-restraint system so that the seat belt
can be secured completely to it.
Move the seat forward or back.

Move the seatback forward or back.

An i-Size child-restraint system refers to a child-restraint system which has

acquired i-Size category certification for the UN-R 129 regulation.
When installing a child-restraint system to the passenger seat, refer to the
child-restraint system manufacturer's instructions.
Seating position
Seating position suitable for uni-
versal belted (Yes/No)
i-Size seating position (Yes/No)
Largest suitable rearward facing
fixture (R1)
Largest suitable rearward facing
fixture (R2)
Largest suitable rearward facing
fixture (R2X)
Largest suitable rearward facing
fixture (R3)
Largest suitable forward facing
fixture (F2)
Largest suitable forward facing
fixture (F2X)
MX-5_8ME4-EA-23L_Edition1_new
Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
Positions Table
Passenger
Airbag activated
Yes (UF)
No
No
No
No
No
No
No
Airbag de-activated
Yes (U)
No
No
No
No
No
Yes (IUF)
Yes (IUF)
3-37
2023-8-31 16:47:34