Mazda MX-5 2024 Owner's Manual page 217

BSM warning light
Instrument cluster
NOTE
The Vehicle Exit Warning may not

operate normally if any of the
following conditions is met.
The rear side radar sensors cannot

detect an object.
Refer to Radar Sensors on page
5-94.
There is a parked vehicle near your

vehicle.
Moving objects are slow.

A bicycle carrier is attached to the

rear of the vehicle, the radar signal
may be blocked and the Vehicle Exit
Warning may not operate correctly.
MX-5_8ME4-EA-23L_Edition1_new
Blind Spot Monitoring (BSM)
The Vehicle Exit Warning may

operate with stationary objects on
the road or the roadside (such as
guardrails, sidewalls, and parked
vehicles).
The brightness of the BSM warning

lights is linked to the panel light
control.
Refer to Dashboard Illumination on
page 5-21.
Turning off the warning sound
There are 2 ways to turn off the
warning sound while the BSM and the
Vehicle Exit Warning is operating.
Turn off the warning sound using

Mazda Connect.
Set in the Mazda Connect "Settings"
or consult an Authorized Mazda
Dealer.
Turn off the warning sound using the

i-ACTIVSENSE mute switch.
Refer to How to Use the
i-ACTIVSENSE mute switch on page
5-89.
Turning off the BSM and the Vehicle
Exit Warning
The BSM and the Vehicle Exit Warning
can be turned off using the Mazda
Connect.
Set in the Mazda Connect "Settings" or
consult an Authorized Mazda Dealer.
Driving
5-109
2023-8-31 16:47:34