Xcc Events Organized By Severity - Lenovo ThinkSystem SR670 Reference Manual

Table 1. Events that automatically notify Support (continued)
Event ID
FQXSPIO0001L
FQXSPIO0011N
FQXSPIO0015M
FQXSPMA0007L
FQXSPMA0008N
FQXSPMA0011G
FQXSPPU0004M
FQXSPPW0002L
FQXSPPW0035M
FQXSPPW0047M
FQXSPPW0063M
FQXSPSD0001L
FQXSPSD0002G
FQXSPSD0002L
FQXSPSD0003G
FQXSPSD0006L
FQXSPSD0008L
FQXSPSS4004I
FQXSPSS4005I

XCC events organized by severity

The following table lists all XCC events, organized by severity (Information, Error, and Warning).
Table 2. Events organized by severity
Message String
Event ID
FQXSPBR4000I Management Controller [arg1]: Configuration restored from a file by
user [arg2].
FQXSPBR4002I Management Controller [arg1] Reset was caused by restoring default
values.
Message String
The connector [PhysicalConnectorElementName] has encountered a
configuration error.
An Uncorrectable Error has occurred on [SensorElementName].
Fault in slot [PhysicalConnectorSystemElementName] on system
[ComputerSystemElementName].
Scrub Failure for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Uncorrectable error detected for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
Memory Logging Limit Reached for [PhysicalMemoryElementName] on
Subsystem [MemoryElementName].
[ProcessorElementName] has Failed with FRB1/BIST condition.
Power supply [arg1] in the enclosure (MTM-SN: [arg2])has failed.
Numeric sensor [NumericSensorElementName] going low (lower critical) has
asserted.
Numeric sensor [NumericSensorElementName] going high (upper critical) has
asserted.
Sensor [SensorElementName] has transitioned to critical from a less severe
state.
Drive [arg1] in the enclosure(MTM-SN: [arg2]) has been disabled due to a
detected fault.
Failure Predicted on drive [arg1] in the enclosure (MTM-SN: [arg2]).
Drive [arg1] in the enclosure(MTM-SN: [arg2]) has been disabled due to a
detected fault.
Failure Predicted on drive [arg1] in the enclosure (MTM-SN: [arg2]).
Array failed on drive [arg1] in the enclosure (MTM-S/N: [arg2]).
Array failed on drive [arg1] in the enclosure (MTM-S/N: [arg2]).
Test Call Home Generated by user [arg1].
Manual Call Home by user [arg1]: [arg2].
Severity
Informational
Informational
.
Chapter 2 XClarity Controller events
7