Kodak PROFESSIONAL HR 500 Plus User Manual page 70

Using the Long Roll Accessory
Preparing the Scanner for the Long Roll Accessory
You must remove the film holder guide from the scanner before you install the
Long Roll Accessory.
1. Power off the scanner.
2. Remove the two thumbscrews and loosen the captive screw.
3. Lift the film holder guide up and off the scanner.
D-6
thumbscrews
captive screw
CAUTION: As indicated in Step 1 below, make sure the scanner is
powered OFF.
Get other manuals https://www.bkmanuals.com
film holder guide
P192_1539BCA
P192_1539BC
May 2002