Kodak PROFESSIONAL HR 500 Plus User Manual page 42

Validating the Scanner
3. Click OK.
4. Select Image>Adjust>Auto Levels.
5. Select Image>Rotate Canvas>Flip Vertical.
6. Check that the image appears as you expected.
7. If the image does not appear as you expected, repeat this procedure, making
3-10
b. Enter the Channel information:
• Set the Count to 3.
• Make sure Interleaved is selected.
• Set Depth to 16 Bits.
• Set Byte Order to IBM PC.
After a few seconds, the raw image appears.
After a few seconds, a clearer image should appear.
NOTE: You may also need to select Image>Rotate Canvas>90° CCW.
sure you follow the instructions exactly. Then if you still do not get the
expected results, contact your Kodak representative.
Get other manuals https://www.bkmanuals.com
May 2002