Control Panel - commercial cool CCPACA10 Series User Manual

SET UP & USE

CONTROL PANEL

MODE SELECT BUTTON
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in the sequence that goes
from COOL, DEHUM, FAN and HEAT.
The mode indicator light illuminates
under the different mode settings.
NOTE: · Heat mode is only for models with
heat options
TIMER BUTTON
Press the TIMER button when the unit
is powered ON to set an AUTO START
time.
When unit is ON Press the TIMER button
to set an AUTO STOP time. Use the
and to set the time between 1-24
hours. The amount of hours will display
on the LED display.
POWER BUTTON
Power switch ON/OFF.
FAN SPEED
INDICATOR LIGHTS
TEMPERATURE
BUTTON + / -
POWER
BUTTON
MODE INDICATOR
LIGHTS
LED DISPLAY
BUTTON
MODE
BUTTON
REMOTE
SENSOR
FAN BUTTON
Press SPEED to select either the HIGH
or LOW fan speed when the unit is in
fan mode. The HIGH or LOW fan speed
indicator light will illuminate.
UP ( )/DOWN(
BUTTON
Used to adjust (increasing/decreasing)
temperature settings in a range of 62°F
(17°C) to 88°F (30°C) or the TIMER
setting in a range of 1~24 hours.
REMOTE SENSOR
Remote signal receptor accepts
commands from the remote control.
LED DISPLAY
Displays the set temperature in
Fahrenheit. Displays Auto-timer settings
and while in DRY and FAN modes
displays room temperature.
SPEED
TIMER
BUTTON
)
Page 13