Installation - commercial cool CCPACA10 Series User Manual

SET UP & USE
WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fit most standard "Vertical" and
"Horizontal" window applications; however, it may be necessary for you to
improvise/modify some aspect of the installation procedures for certain types of
window. Minimum and maximum window openings:
MINIMUM: 26.5 INCHES (67.5 CM)
MAXIMUM: 48 INCHES (123 CM)
Window slider kit can be secured by inserting the bolt.
Horizontal Window
NOTE: If the window opening is less than the mentioned minimum
length of the window slider kit, cut the one with a hole in it short
to fit for the window opening. Never cut out the hole in window
slider kit.
DOUBLE-HUNG SASH/SLIDING CASEMENT WINDOW INSTALLATION
1. Cut the foam seal (adhesive type) to
the proper length and attach it to the
window stool.
2. Attach the window slider kit to the
window stool. Adjust the length of
the window slider kit according to
the width of window, shorten the
adjustable window kit if the width of
window is less than 26.5". Open the
window sash and place the window
slider kit on the window stool.
3. Cut the foam seal (adhesive type) to
the power length and attach it on the
top of the window.
4. Close the window sash securely against
the window slider kit.
5. Secure the window slider kit to the
window stool.
6. Cut the foam seal to an appropriate
length and seal the open gap between
the top window sash and outer window
sash.
NOTE: · Window Slider Kit can reach a minimum of 26.5" and a maximum of 48.0"
Page 10
Vertical Window Window Slider Kit
Bolt
Cut on opposite
side of hole.
Foam
Seal
Window Stool
Window
Slider Kit
Window
Slider Kit
Foam
Seal
Foam
Seal
26.5"~48.0"
Window
Slider Kit
Window
Slider Kit
Foam
Seal