Start - End Of Season Operations - commercial cool CCPACA10 Series User Manual

CLEANING & CARE
DANGER
1. Be sure to unplug the unit
before cleaning or servicing.
2. Do not use gasoline, thinner or
other chemicals to clean the
unit.
3. Do not wash the unit directly
under a tap or using a hose. It
may cause electrical danger.
4. If the power cord is damaged,
it should be repaired by an
authorized technician.
AIR FILTER
Clean the air filter at least once every
two weeks to keep fan operation at its
optimum efficiency. Grasp the filter tab
and slide the filter out.
Figure 5
CLEANING
Wash the air filter by immersing it gently
in warm water (about 104°F/40°C) with
a neutral detergent. Rinse and dry the
filter.
Re-install the air filter after cleaning.
UNIT ENCLOSURE
Use a lint-free cloth soaked with neutral
detergent to clean the unit enclosure.
Finished by a dry clean cloth.
EXTENDED UNIT STORAGE
•
Remove the rubber plug at the back of
the unit and attach a hose to drain outlet.
Remove the plug from the bottom drain
outlet, all the water in the bottom tray
would drain out. (see picture on pg.16)
Place the open end of the hose directly
over the drain area in your basement floor.
• Keep the appliance running on FAN mode
for half a day in a warm room to dry the
appliance inside and prevent mold.
• Stop the appliance and unplug it, wrapped
the cord and bundle it with the tape.
Remove the batteries from the remote
controller.
• Clean the air filter and reinstall it.
• Remove the exhaust hose. Cover the
window hole or remove the window slider.
Page 17