Panasonic PT-52DL10 Operating Instructions Manual page 37

Split screen
Changing the channel of the right screen
during SPLIT SCREEN FULL, SPLIT SCREEN NORMAL, and
PoutP.
1
RH.SPL[T
Press to operate right screen.
While _C] is displayed on the screen, press
to switch modes.
Example:
Change to
. channel 5.
Viewing videos
TVNIDEO
While _C] is displayed on the screen, press to switch
modes.
• The channels for the left screen can be changed in the same
way as when the screen is single.
• When ACTIVE is displayed, the left screen will not operate.
Swapping left and right screens
SWAP
PAUSE
During SPLIT SCREEN FULL,
SPLIT SCREEN NORMAL,
PoutP: Press to swap.
Example:
During SPLIT SCREEN NORMAL.
Screen mode names:
CHlO CH3
SPLIT SCREENFULL
SPLIT SCREENNORMAL
CHIO
PoutP
Notes:
• The right and left screens cannot display the same picture at the same time.
• Use the right screen when playing video games on a split screen (to avoid distortion of images).
• When the ANTENNA setting is set to ANT2, input for the left screen cannot be switched (see page 24).
37