Panasonic PT-52DL10 Operating Instructions Manual page 21

Power ON / OFF
Power (ON / OFF) button
Push the Power button to turn the projection TV ON,
from Stand-by mode.
The projection TV must first be switched on at the wall
outlet and the Power switch.
The Power Indicator will blink Green.
_, Approximately 10 seconds
The Power Indicator will become Green.
Remote Control Sensor--
rrm CH123
STEREO
SAP
NORMAL
Example: The screen above is display for a while after
the projection TV is turned on. (Setting
condition is an example.)
Push the Power button to turn the projection TV to
Stand-by mode.
The Power Indicator will become Orange.
_, Approximately 90 seconds
The Power Indicator will become Red.
The Power Indicator
LED ACTION
No illuminated Power - OFF
Red Stand - by
Green Power - ON
Green blink Power - ON
(approximately 10 seconds after)
Orange blink Power - OFF (by the remote control)
(approximately 90 seconds after)
Note:
Even when the main power switch (FUNCTION SWITCH) is turned off, and the POWER indicator is not lit, the projection
TV is not completely cut off from the power if the power cable is still plugged in.
21