Cable Tv - Panasonic PT-52DL10 Operating Instructions Manual

I Cable TV
i
Incoming Cable from Antenna
or Cable TV System.
ANTENNA TERMINALS
ON THE BACK OF THE
PROJECTION TV
ANT1 SPLIT ANT2 |
OUT
J
I
CABLEBOX
When the antenna cable is
connected to the TV antenna
terminal via a cable box or VCR, set
the TV channel to CH3 or CH4. After
select ANT2 in the PROGRAM
CHANNELS (see page 24).
This does not apply when signal is
input from VIDEO INPUT.
Confirming
Confirm that registration with cable TV and connection of equipment are
completed. Turn the cable TV tuner and select the desired volume level.
Press while pointing the remote control
towards the cable TV tuner.
Note:
The remote control code number is set for
Panasonic products.
When peripheral equipment do not operate,
reset code (see page 63, 64).
Operate the cable TV tuner and select the desired volume level.
31