Panasonic PT-52DL10 Operating Instructions Manual page 10

Installation
Antenna Connection (Cable Box, and VCR)
Use this configuration when connecting the projection TV to a cable TV system using a Cable Box and VCR.
ANTENNA TERMINALS
ON THE BACK OF THE
PROJECTION TV
SPLIT ANT2
OUT
®
Connect the cable from the antenna
or cable system to the ANT1
terminal on the back of the
projection TV.
Incoming Cable from Antenna
or Cable TV System
Connect the cable from the
antenna or cable system to
the Input terminal on the
back of the CABLE BOX.
Connect the cable from the
Output terminal on the back
of the Cable Box to the
Antenna input terminal on the
back of the VCR.
,' OUTPUT INPUT
vr--OUTPUT_ ii
---@::@ ® @®®®::
I BV_DE0 _0EO L AU_C,R I
I ..... J
?
f TO VCR
TERMINAL ON
THE BACK OF
THE CABLE BOX
Q @
INPUT OUTPUT
Ir
CABLE BOX
Notes:
• When the antenna cable is connected to the projection TV antenna terminal via a cable box or VCR, set the TV channel
to CH3 or CH4 cable, after select ANT2 in the PROGRAM CHANNELS. (See page 24, 26) This does not apply when
signal is input from VIDEO INPUT.
• To use special features such as Favorite Channel Captions, ANT1 must be selected in the PROGRAM CHANNELS.
(See page 24, 26)
10