Jenn-Air W11528111A Installation Manual page 35

INSTALLATION
5
From inside the door, install the wood
screws through the slotted holes in the
metal brackets.
Continue to "Leveling and Securing"
section at step 5.
6
Adjust the panel side to side to achieve
a desired gap on both sides. Install the
remaining screws through the door
bracket into the panel.
NOTE: Be sure that the panel is aligned
with adjacent cabinet before installing
the remaining screws to secure the
door panel.
7 Replace the top and bottom end caps
into the door. Fix the bottom end cap
using screw through the bottom metal
bracket hole.
INSTALLATION | 35