Jenn-Air W11528111A Installation Manual page 33

INSTALLATION
6 Slide ice maker into the cabinet while
managing the utility connection
positions behind the ice maker. Be
sure to cover the floor with cardboard
or hardboard to avoid damaging it.
IMPORTANT: For the flush install, the
ice maker utility connections must be
routed out through the slot in the ice
maker rear panel.
7 Be sure that the ice maker is at desired
depth. Secure the top and bottom
hinges to the side of the cabinet using
wood screws.
Cabinet bracket
8
Attach the cabinet brackets (provided
with ice maker) to the holes in the
front of ice maker as shown in the
illustration. Attach the cabinet brackets
to the side of the cabinet with wood
screws.
NOTE: For the custom wood panel
installation, continue installation
at step 6 of "Custom wood panel
installation."
INSTALLATION | 33