Using The Tray Select Key (Mfc-5840Cn Only) - Brother MFC-5440CN User Manual

Using the Tray Select key (MFC-5840CN only)
The MFC uses the paper in Tray#1 first. You can change the tray that
will be used for next copy only.
"I Press (Copy) to illuminate it in green.
2
Load your document.
3 Use the dial pad to enter the number of copies you want
(up to 99).
4 Press Tray Select.
5 Press • orT to select Auto, #1 (xxx) or #2 (xxx).
Press Menu/Set.
Press Black Start or Color Start.
6
[]
If both trays are using paper that is the same type and size,
Auto will allow your MFC to take paper from Tray#2 if
Tray#1 is out of paper.
You can only use plain paper sizes Letter, Legal or A4 in
Tray#2.
8- 7 MAKING COPIES