Setting The Ring Volume; Setting The Beeper Volume - Brother MFC-5440CN User Manual

Setting the Ring Volume
You can turn the ring off or you can select the ring volume level.
1 Press Menu/Set, 1,4, 1. f Volume |
2
Press • or, to select [ 1. Ring
J
Low, Hed, High
or off.
Press Menu/Set.
3 Press Stop/Exit.
--OR--
You can adjust the ring volume when your MFC is idle (not being
used). In Fax mode , press _> or _/_) to adjust the volume
level. Every time you press these keys, the MFC will ring so you can
hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low. When the beeper is on, the MFC will beep when you press a
key, make a mistake and whenever you send or received a fax.
1 Press Menu/Set, 1,4, 2.
2
Press • or • to select your option.
(Low, Hed, High or
off)
Press Menu/Set.
3
Press Stop/Exit.
Volume
J
2.Beeper
GETTING STARTED 2- 5