General Setup; Setting The Mode Timer; Setting The Paper Type - Brother MFC-5440CN User Manual

General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax,
Scan and Copy. The PhotoCapture key (MFC-5840CN only) is also
a temporary mode key. You can change the number of seconds or
minutes that the MFC takes after the last Scan, Copy or
PhotoCapture operation before it returns to Fax mode. If you select
off, the MFC stays in the mode you used last.
Photo
Capture
(MFC-5840CN only)
L
1 Press Menu/Set, 1, 1.
2
Press • or • to select
O Sec, 30 Secs, 1 Min, 2
5 Hins or Off.
Press Menu/Set.
3 Press Stop/Exit.
P
Fax
Sca_
Hins,
C_py
d
General Setup ] l.Mode Timer
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
1 Press Menu/Set, 1,2.
2
Press • or • to select
Plain,
Inkjet, Glossy or
Transparency.
Press Menu/Set.
3 Press Stop/Exit.
[]
General Setup ]
2.Paper Type
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet
immediately to prevent smudging or paper jams.
(MFC-5840CN only)
You can only use plain paper in Tray#2.
GETTING STARTED 2- 3