Brother MFC-5440CN User Manual page 155

7
If you replaced an ink cartridge while Near Empty was
displayed on the LCD, the LCD may ask you to verify that it was
a
brand
new one.
Example:
Did You Change Blck? 1. Yes
2. No. For each new cartridge you installed, press 1 on the dial
pad to automatically reset the ink dot counter for that color. If the
ink cartridge you installed is not a brand new one, please be
sure to select 2.
_flf you wait until Ink Empty message is displayed on the LCD,
the MFC will automatically reset the ink dot counter.
If the
Install
message is on the display after you have
installed ink cartridges, check that the ink cartridges are
installed properly.
,_ WARNING
If ink gets in your eyes, irrigate them with water immediately and call
a doctor if you are concerned.
11 - 27 TROUBLESHOOTING AND ROUTINE MAINTENANCE