Operation; Start Cooking; Finish Cooking - Samsung NZ64R3747RK User Manual

Operation

Start cooking

Touch the ON/OFF control. After power on, the buzzer
beeps once, timer control show "---", cooking zone
selection controls show "-", indicating that the
appliance has entered the state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
Touching the cooking zone selection control and an
indicator where you touched will flash.
Adjust heat setting by touching the slider control.
• If you don't choose a heat setting within 1 minute,
the appliance will automatically switch off. You will
need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
If the display shows with the heat setting
This means that:
you have not placed a pan on the correct cooking zone or,
•
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed
on it.
20 English

Finish cooking

Turn the cooking zone off by touching the slider to the
left. Make sure the display shows "0".
OR
Touching the cooking zone selection control for
approximately 2 seconds to turn off the cooking zone.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to a
safe temperature. It can also be used as an energy
POWER UP
saving function if you want to heat further pans, use
the ceramic glass that is still hot.
POWER UP
POWER DOWN
OR