Operation; Using The Touch Buttons; Switching The Appliance On; Select Cooking Zone And Power Level Setting - Samsung NZ84T9770EK User Manual

Operation

Operation

Using the touch buttons

To operate the touch buttons, touch the desired button with the tip of your pointed
finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one button when operating the appliance. If
your finger is too flat on the button, an adjacent button may be actuated as well.

Switching the appliance on

NOTE
After the On/Off button has been actuated to switch on your appliance, a
heat setting must be selected within approximately 20 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
18 English
NZ84T9770EK_EU_DG68-00630B-00_EN.indd 18
The appliance is switched on using the On/
Off button.
Press the On/Off button for
approximately 1 second.
The digital displays will show .

Select cooking zone and power level setting

1.
2.
NOTE
• The default level is set to 15 when selecting the cooking zone.
• If more than one button is pressed for longer than 8 seconds,
the heat setting display. To reset, press the On/Off
• If you try to turn the magnetic knob by grabbing the side or pushing it
strongly, it will not work.
• If you try to turn the magnetic knob with gloves on, the knob may not work.
For selecting the cooking zone, press
the corresponding cooking zone button.
Turn the magnetic knob to set the
power level.
will show in
button.
2020-02-25 12:35:17