Ricoh SP 201N Operating Instructions Manual page 21

Hide thumbs Also See for SP 201N:

Table of Contents

Configuring Network Settings

To select Ad-Hoc mode, press the [Job Reset] key.

If the machine has been set to Infrastructure mode, it reboots itself after Step 4 and switches to Ad-

hoc mode.

If [Wireless LAN Status Report:] is set to [On], a report confirming the completion of wireless LAN

setup is printed.

If "OK" appears for "Connection", the connection has succeeded. If "Failed" appears for

"Connection", try configuring the settings again.

• When configuring [Open System - WEP], the connection appears to have been established even if

you enter the wrong WEP key and the connection fails. In this case, enter the correct WEP key.

Table of Contents

Sp 201nw