Sony RM-E300 Operating Instructions Manual page 70

| Movers} ilelam-lilem alelaleicovamelmere) ni tce)
Rear panel
(1) SONY/MEMORY select switch
SONY
A Sony product is used for the recorder.
MEMORY | Other product is used for the recorder.
(2} COMMAND MODE (remote control mode) selector
When a Sony product is used for the recorder, set this
selector according to the COMMAND MODE selector on
the VCR.
(3] PAUSE MODE selecter
To release the recording pause mode, set this selector
according to the button on the VCR to be used.
A: Torelease with the ff PAUSE button.
B: Torelease with the ® PLAY button.
C: Torelease with the @ REC button.
When a Sony product is used for the recorder, set this to
"A".
(4] CONTROL L connector (stereo mini-minijack)
Connect to the CONTROL L connector on the recorder.
(5] CONTROL S connector (minijack)
Connect to the CONTROL S connector on the recorder.
When the CONTROL L and CONTROL S connectors
are equipped with the recorder, use the CONTROL L
connector.
{6] RECORDER OUTPUT connectors
R and L jacks (phono type): for audio connection.
V jack (phono type): for video connection
S connector (4-pin mini-DIN):
for S video connection when the S VIDEO INPUT
connector is equipped with the recorder.
70
[7] PLAYER INPUT connector
R and L jacks (phono type): for audio connection.
V jack (phono type): for video connection.
S connector (4-pin mini-DIN):
for S video connection when the S VIDEO OUTPUT
connector is equipped with the player.
The signal input to the S VIDEO INPUT connector is
output from only the S VIDEO OUTPUT connector
and the signal input to the phono type input jacks is
output from only the phono type output jacks.
Connect the recorder and the player to each S
connector.
SHUTTLE select switch
When the shuttle dial is not equipped with the
player.
When the shuttle dial is equipped with the
player, the playback speed is adjustable with
the shuttle dial on this unit.
(9) DC IN 6 V jack
Connect the supplied AC-D4L AC power adaptor.
CONTROL L connector (stereo mini-minijack)
Connect to the CONTROL L connector on the player.