Sony RM-E300 Operating Instructions Manual page 60

To Edit only Desired Scenes Automatically in the Desired Sequence
se iceluirclicem-Cxiciiile)(-m tel dlare|
To stop automatic assemble editing
Press the PGM EDIT button.
To start recording smoothly
Set the recorder to the playback pause mode and then
press the @ REC button.
Notes
+ When the time between the cut-out point of the previous
scene and the cut-in point of the next scene is more than
several minutes (depending on the VCR being used) with
the search function, automatic assemble editing is
impossible.
« After setting the programs
— Never press the COUNTER RESET button on the
player.
— Never eject the cassette from the recorder.
Any of these actions wit! cause a missetting of the cut-in
and cut-out points.
To avoid missing the cut-in and cut-out points
In automatic assemble editing, the player starts playing back
approximately 5 to 10 counts before the cut-in point and
remains in playback approximately 1 count after the cut-out
point. The recorder records the picture between the cut-in
and cut-out points.
tape 1 t
IN OUT
point point
Edited
tape
60