Sony RM-E300 Operating Instructions Manual page 73

Troubleshooting
Symptom
Recorder cannot be operated with the RM-E300
When the recorder is connected to the CONTROL L
connector
« Recorder connected to the CONTROL L connector for the
recorder?
* COMMAND MODE selector set to the correct position?
When a Sony recorder without the CONTROL L or
CONTROL S connector is used
* Connecting cord connected to the CONTROL L or
CONTROL § connector of the RM-E300?
« COMMAND MODE selector set to the correct position?
When other manufacturer's video product is used as the
recorder.
« Control signals memorized already?
Shuttle dial cannot be operated. Tape at its end?
If the tape is at its end, first rewind the tape using the <4
REW button and then use the shuttle dial.
Automatic assemble editing cannot be executed after PGM
EDIT button is pressed.
Before the PGM EDIT button is pressed, the recorder has
been set to recording pause mode?
* C. POSITION button pressed?
memorized in PAGE 3 or 4?
S|
73