Preparations For To Edit The Tape - Sony RM-E300 Operating Instructions Manual

Preparations for editing
Locate the cut-in point of the original tape.
Put the cut-in point into memory.
Locate the cut-out point of the original tape.
Put the cut-out point into memory.
If necessary, preview the memorized scenes.
If necessary, correct the cut-in point or the cut-out
point.
Start editing.
* Check the connections.
* Install the cassette to be played back into the video
camera recorder and prepare for playback.
+ Install the cassette for recording into the recorder and
prepare for recording. Be sure that the tab on the
recording cassette is not slid out.
¢ Acut-in point should be at least 10 counts of the tape
counter after the beginning of the tape, and the cut-out
point should be at least 3 counts before the end of the
tape. With less space, the starting point may be missed or
automatic assemble editing may not operate correctly.
+ Please refer to the instruction manual of the recorder and
the player.
43