Table of Contents
Advertisement
Home Connect
en
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
■
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Operating the appliance directly from the appliance
■
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
Setting up
To set up Home Connect for your appliance, you
require the following:
Your appliance, which must be connected to the
■
mains and switched on,
A smartphone or tablet with the latest version of the
■
iOS or Android operating system,
The Home Connect app,
■
The supplied Home Connect installation instructions,
■
And your appliance within range of the Wi-Fi signal
■
for your home network
The app guides you through the entire process. Follow
the instructions in the app.
Basic setting
WiFi
Network
Connect to app
Remote control
Appliance information °
30
Possible settings
Switching on/off
Connecting to the network/
disconnecting from the net-
work
on/off
Remote Start
To start and operate your appliance via the Home
Connect app, you will need to activate remote start. If
remote start is not activated, you will only be able to
view the operating statuses in the Home Connect app
and configure your appliance's settings.
Some of the operating modes can only be started
Note:
on the oven.
Remote start is automatically deactivated:
if you open the oven door 15 minutes after remote
■
start has been activated.
if you open the oven door 15 minutes after the
■
operation has finished.
When you start the oven using the controls on the
appliance itself, remote start is activated automatically.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
Touch the Menu field.
1.
Touch the "Remote Start" text field.
2.
C will appear on the display
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
You will find the Home Connect settings in your
Note:
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Explanation
You can switch the wireless module on and off. If WiFi is activated, you can use the Home
Connect function. The appliance requires max. 2 W in networked standby.
Switch the network connection on or off as required (e.g. for holiday).
Network information is retained after the appliance is switched off. After switching on the
appliance, wait for a few seconds while it reconnects to the network.
Start the connection process between the app and the appliance.
Use the Home Connect app to access the appliance's functions. When it is deactivated,
only the operating statuses are displayed in the app.
The display shows the network and appliance information.
Advertisement
Table of Contents
