Table of Contents
Advertisement
Operating the appliance
en
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment without anything in it and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove any leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment and remove
the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft,
damp cloth.
Press the on/off button ÿ to switch on the
4.
appliance.
Fill the water tank. ~ "Filling the water tank"
5.
on page 23
Set the specified type of heating, temperature and
6.
steam injection, then start the appliance. ~ "Steam
baking – Steam-assisted cooking" on page 22
Settings
Type of heating
4D hot air < with added steam, setting 03
(high)
Temperature
Maximum
Cooking time
1 hour
Keep the kitchen ventilated while the appliance is
7.
heating.
Use the on/off button ÿ to switch off the appliance
8.
once the specified time has elapsed.
Wait for the cooking compartment to cool down.
9.
Clean the smooth surfaces with soapy water and a
10.
dish cloth.
Empty the water tank and dry the cooking
11.
compartment. ~ "After every steam operation"
on page 24
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
18
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The childproof lock and the timer can also be set
Note:
when the appliance is switched off. Certain displays and
notes, such as those relating to the residual heat in the
cooking compartment, remain visible on the display
after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Press the ÿ On/Off button to switch on the appliance.
The Bosch logo appears on the display, followed by the
selection list for the types of heating.
In the basic settings, you can specify which
Note:
operating mode should appear after the appliance is
switched on. ~ "Basic settings" on page 29
Switching off the appliance
Press the ÿ On/Off button to switch off the appliance.
Any functions that may be running are cancelled.
The time, or if applicable, the residual heat indicator,
appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 29
Starting the operation
You must press the l Start/Stop button to start each
operation.
After starting the appliance, the time display is shown
on the display along with the settings. The display ring
and the heating line also appear.
Pausing the operation
You can also interrupt and then continue an operation
using the l Start/Stop button.
If you press and hold the l Start/Stop button for
approx. 3 seconds, the operation is cancelled and all
settings are reset.
The fan may continue to run after an operation
Note:
has been paused or cancelled.
Advertisement
Table of Contents
