Table of Contents
Advertisement
Preparation for the camera
Precautions regarding using an SD card on a PC
Always format an unused SD card or an SD card that has been
used on a PC or other device by inserting it into the camera and
using the INSTAX Pal app before using it in the camera.
* You can format the SD card from the Media settings on the app.
When an SD card is formatted and used for shooting and
recording, folders are automatically created. Do not use your PC to
rename or delete folders or files on the SD card. Doing so may
make the SD card in the camera unusable.
• Do not use your PC to delete images on the SD card. Always use
the INSTAX Pal app.
• If you want to edit an image file, copy or move the image file to a
hard disk or similar device, and then edit the copied or moved
image file.
6
Charging the battery
Connect the camera using the supplied dedicated charging cable
to a USB AC adapter (sold separately) then connect the USB AC
adapter to an indoor power supply.
• Charging time is approximately 2 to 3 hours.
• When charging starts, the round lamp on the front of the
camera lights up.
• The power delivered by the charger must be between min
1.4 Watts required by the radio equipment, and max 2.5 Watts
in order to achieve the maximum charging speed.
• Charging times may increase at very low or very high
temperatures.
Charging status
* If the camera is not turned on, the light will turn off after the
battery is fully charged. When the camera is turned on without
being connected to the app, the light turns white after the
battery is fully charged.
Charging
The light flashes.
* The flash lamp does not light when the
camera is turned on.
Charging
The light stops flashing.
completed
Charging error
The light stops flashing.
* If the camera is turned off, the lamp disappears after the battery
is fully charged. When the camera is turned on without being
connected to the app, the lamp lights white after the battery is
fully charged.
Charging from a PC:
• Connect the camera and PC directly. Do not connect via a USB
hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
paused. To continue charging, exit sleep mode and then
reconnect the USB Type-C cable.
• The battery may not be able to charge depending on the
specifications, settings or conditions of the PC.
Notes
• The battery is not fully charged at the factory. Be sure to
charge the battery before using the camera.
• For notes about the battery, see "Simple camera care" (page
29).
Advertisement
Table of Contents
