Table of Contents
Advertisement
Charging the Battery
Turn off the camera before charging the battery. Battery will not
charge if the camera is turned on.
Connect the camera using the supplied dedicated charging cable
to a USB AC adapter (supplied with your smartphone) then
connect the USB AC adapter to an indoor power outlet.
• Charging time is approximately 2 to 3 hours.
• The power delivered by the charger must be between min 0.4
Watts required by the radio equipment, and max 2.5 Watts in
order to achieve the maximum charging speed.
Charging Status Indication
While charging
Self timer lamp lights up.
Charging finished
Self timer lamp goes off.
Charging error
Self timer lamp flashes.
When charging from a PC:
• Connect the camera directly to the PC, not through a USB hub
or keyboard.
• If the PC goes into hibernation (sleep mode) while charging,
charging will be stopped. To continue charging, wake up the
PC from hibernation (sleep mode) and reconnect the
supplied dedicated charging cable.
• Depending on your PC's specifications, settings, or condition,
it may not be possible to charge the battery.
• It is not possible to remove the battery.
• The battery has not been fully charged at the factory, be sure
to charge the battery before using the camera.
• Please refer to "Simple Camera Care" for precautions
regarding the battery. (p. 27)
8
Power On/Off
To turn the camera on, turn the power switch clockwise.
To turn the camera off, turn the power switch anticlockwise.
• If you do not operate the camera for a certain period of time, it
will automatically turn off. If the camera turns off automatically,
turn the power switch off and then on again to turn it on.
• You can also adjust the time until the camera turns off.
(p. 22)
Advertisement
Table of Contents
