Table of Contents
Advertisement
Preparation for the camera
Using the Multi-use detachable ring
The Multi-use detachable ring can be used not only as a strap, but
also as a simple viewfinder or base for the camera. (page 20)
Attaching the strap
1
Pass the strap through the strap holes.
2
Hook it on your finger.
5
Using the SD card
The camera's internal memory can store about 50 still images, but
you can store more images by using an SD card. You will also need
an SD card to upgrade the firmware. Please prepare an SD card in
advance.
* The latest firmware will be published on the product website.
* SD card is sold separately.
Inserting an SD card
Open the cover and insert an SD card into the microSD card slot.
When removing the SD card, gently push the SD card in until it
clicks and then release it to allow it to pop out. Gently pull the
card out of the slot.
Precautions regarding SD cards
• This camera is compatible with microSD cards and microSDHC
cards. Using other types of SD cards may cause damage to the
camera.
• SD cards are small and may be accidentally swallowed by infants.
Keep them out of the reach of infants. In the unlikely event that
an infant swallows an SD card, consult a physician immediately.
• Do not turn off the camera or remove the SD card during
formatting or while recording/deleting data. The SD card may be
damaged.
• Do not use or store SD cards in an environment that is prone to
strong static electricity or electrical noise.
• Inserting an SD card charged with static electricity into the
camera may cause the camera to malfunction. If this happens,
turn the camera off and then on again.
• Do not carry an SD card in the pocket of your pants. A strong
force may be applied when you sit down, which may cause the
SD card to break.
• The SD card may become hot to the touch after prolonged use,
but this is not a fault.
• Do not put any labels on SD cards. If the label comes off, it may
cause the camera to malfunction.
Advertisement
Table of Contents
