Bluetooth® Devices: Cautions - FujiFilm instax Pal User Manual

Hide thumbs Also See for instax Pal:
Table of Contents

Advertisement

Information for traceability in Europe
Manufacturer: FUJIFILM Corporation
7-3, Akasaka 9-Chome, Minato-ku, Tokyo
Japan
Authorized representative in Europe:
FUJIFILM Europe GmbH
Balcke-Duerr-Allee 6, 40882 Ratingen
Germany
EU Importer: FUJIFILM Europe B.V.
Oudenstaart 1, 5047 TK Tilburg
The Netherlands
UK Importer: FUJIFILM UK Limited
Fujifilm House, Whitbread Way,
Bedford, Bedfordshire, MK42 0ZE
UK
Bluetooth® Devices: Cautions
IMPORTANT: Read the following notices before using the product's
built-in Bluetooth transmitter.
■ Use only as part of a Bluetooth network.
FUJIFILM does not accept liability for damages resulting from
unauthorized use. Do not use in applications requiring a high
degree of reliability, for example in medical devices or other
systems that may directly or indirectly impact human life. When
using the device in a computer and other systems that demand a
greater degree of reliability than Bluetooth networks, be sure to
take all necessary precautions to ensure safety and prevent
malfunction.
■ U se only in the country in which the device was purchased.
This device conforms to regulations governing Bluetooth devices
in the country in which it was purchased. Observe all location
regulations when using the device. FUJIFILM does not accept
liability for problems arising from use in other jurisdictions.
■ W ireless data (images) may be intercepted by third parties.
The security of data transmitted over wireless networks is not
guaranteed.
■ D o not use the device in locations subject to magnetic
fields, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in
other locations subject to magnetic fields, static electricity, or
radio interference that may prevent reception of wireless signals.
Mutual interference may occur when the transmitter is used in the
vicinity of other wireless devices operating in the 2.4 GHz band.
■ T he Bluetooth transmitter operates in the 2.400GHz –
2.4835GHz. The maximum radio-frequency power is
8.05 mW.
■ T his device operates on the same frequency as commercial,
educational, and medical devices and wireless transmitters.
It also operates on the same frequency as licensed transmitters
and special unlicensed low-voltage transmitters used in radio-
frequency identification tracking systems for assembly lines and
in other similar applications.
■ T o prevent interference with the above devices, observe the
following precautions.
Confirm that the radio-frequency identification transmitter is not
in operation before using this device. If you notice that this device
causes interference in low-voltage radio-frequency identification
tracing systems, contact a FUJIFILM representative.
30
■ The following may be punishable by law:
– Disassembly or modification of this device.
– Removal of device certification labels.
■ T rademark Information
The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc., and any use of such marks by
FUJIFILM is under license.
If you have any inquiries about this product, please contact a
FUJIFILM authorized dealer, or access the website below.
http://www.fujifilm.com/

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fi026w

Table of Contents