Table of Contents
Advertisement
Charging the Battery
EN
1
Attach the battery to the charger.
Check the orientation of the battery and install it
according to the shape of the charger.
2
Connect the charger, USB Type-C cable, and
conversion adapter as shown.
Once connected, charging will begin.
* Conversion adapter is sold separately.
• Charging time is approximately 1 to 2 hours.
• When charging begins, the round lamp on the charger
lights up.
Charging time may take longer at low or high
temperatures.
• The power delivered by the charger must be between
min 0.4 Watts required by the radio equipment, and
max 2.5 Watts in order to achieve the maximum
charging speed.
■ Charging Status Indication
While charging
Charging finished
Charging error
8
The LED will light orange.
The LED will light green.
The LED will flash orange.
Inserting the Battery
1
3
Push up on the battery cover lock and remove the battery
cover. Align the battery, the shape of the camera, and the
position of the terminals, fit the battery in by sliding it from
left to right, and close the lid.
Checking the Battery Level
You can check the remaining battery power with the
battery icon on the mode indicator.
Battery Icon
Battery status
Battery is fully charged.
Battery capacity is getting low.
Battery capacity is low.
(Flashing)
No battery capacity remains.
2
Advertisement
Table of Contents
