Table of Contents
Advertisement
Figure 5.36:
FINGERTRACKING2
Top View
green status LED
red status LED
red battery LED
infrared LEDs
On/Off switch
L/H switch
set 1/2 switch
colored marking front-
side
letters (L and R) em-
bossed bottom-side
sticker bottom-side
infrared sync receiver
Table 5.7: Description of
target
and
FINGERTRACKING2 Tactile
Event
Description
continuously
synchronization received and tracking
flashing
assigned to a controller, no active tracking
(tactile only)
active
only)
flashing
not assigned to a controller (tactile only)
continously
battery low or discharged
IR LEDs for tracking
activates / deactivates the hand target
select the IR LED brightness (low / high)
select the target geometry (i.e.
pair)
indicates the correct thimble set
hand
indicates whether the hand target is dedi-
cated for the
showing the type and serial number of the de-
vice
receiver for the coded IR flash (i.e. synchro-
nization signal)
FINGERTRACKING2
5.8 Interaction devices
indicates radio communication (tactile
or
blue=left
hand)
red=right hand
or
FINGERTRACKING2 Tactile
and
hand target
2=second
(red=right
blue=left hand
hand
95
Advertisement
Chapters
Table of Contents
