Art ARTTRACK Installation Manual page 119

Whereas, the second LED indicates that the measurement is active. Please refer to
figure 4.1 on page 25 for the visualization of the camera.
ARTTRACK5 : The lower LED shows that the camera is powered up and booted.
Whereas, the upper LED indicates that the measurement is active. In addition to
the two status LEDs the 2-digit LED-matrix on the left displays the assigned camera
ID (default) and the number of markers in the camera's corresponding field of view
(when activated under camera settings). Please refer to figure 4.2 on page 26 for
the visualization of the camera.
ARTTRACK5/C
ered up and booted. Please refer to figures 4.3 on page 27 for the visualization of
the cameras.
TRACKPACK/E
booted. Measurement active is indicated by the lower right LED. Please refer to
figure 4.4 on page 28 for a visualization of the camera.
ARTTRACK2 /
is powered up and booted. Whereas, the right LED indicates that the measurement
is active. In case of an error (e.g. sync loss), the left LED extinguishes and the right
LED starts flashing. Please refer to figures 4.11 and 4.12 on pages 35 and 36 for
the visualization of the cameras.
TRACKPACK (discontinued): The lower left LED show that the camera is powered
up and booted. Measurement active is indicated by the lower right LED. Please refer
to figure 4.13 on page 37 for a visualization of the camera.
One of my cameras recognizes a reflection which I can't eliminate. What can I
do?
You may enable the suppression of static reflexes within
the notes in chapter 5.1.2 on page 40.
I'd like to expand my system. Is it possible?
Tracking systems with
80 cameras. A tracking system with
simply adding additional
and the need to purchase a license for more cameras (e.g. 8 or 16) and an additional
PoE+ switch.
TRACKPACK/E systems can be expanded up to 16 cameras through means of cascading
2 separate systems. One
while the other works in slave mode. The
be extended up to 16 cameras, however more equipment is needed in this case. One
separate ART Controller
: The red LED on the camera body shows that the camera is pow-
: The lower left LED show that the camera is powered up and
ARTTRACK3 (discontinued): The left LED shows that the camera
ARTTRACK cameras are expandable up to a total number of
ARTTRACK1
ARTTRACK cameras. Please double-check your current license
ART Controller
TRACKPACK
or ART Controller/M
DTRACK3
- ARTTRACK6/M
or ART Controller/M
system (discontinued) can also
with a license for cascaded systems is
6.1 Cameras
. But carefully read
can be expanded by
will function as master,
119