Related Manuals for Art Auto-TunePre Project Series
Summary of Contents for Art Auto-TunePre Project Series
- Page 1 Auto-TunePre Tube Preamp powered by Antares® Auto-Tune® Project Series User’s Manual...
- Page 2 IMPORTANT SAFETY INSTRUCTION – READ FIRST This symbol, whenever it appears, This symbol, wherever it appears, alerts you alerts you to the presence of uninsulated to important operating and maintenance dangerous voltage inside the enclosure-voltage instructions in the accompanying literature. that may be sufficient to constitute a risk of shock.
- Page 3 INTRODUCTION The Auto-Tune Pre combines an ART tube preamp channel with integrated Antares® Auto-Tune® processing in a compact easily accessible package ideal for studio or stage. Now live artists can easily add high quality Antares pitch processing without the complexity and cost of an external computer and software.
- Page 4 CONNECTIONS The INPUT “Combo” jack allows for either XLR or ¼-inch TRS input connections. The XLR input connection is used primarily for balanced microphone input. Pin 2 is positive, pin 3 is negative, and pin 1 is ground. +48 Volt phantom power (when en- abled) is supplied to pins 2 and 3.
-
Page 5: Rear Panel Switches
The ¼-inch MAIN OUTPUT jack is unbalanced with an output impedance of 300 Ohms. The maximum output level is +18dBu. The XLR MAIN OUTPUT jack is balanced with an output impedance of 600 Ohms. The maximum output level is +24dBu. It can provide clean balanced signals for long cable runs. -
Page 6: Controls And Operation
CONTROLS AND OPERATION PREAMP SECTION CONTROLS The GAIN control directly adjusts the input amplifier’s gain, giving you control over the dynamic range of your source. You get from 0 to 48dB of gain depending on settings. Set this control counterclockwise to minimum gain when first connecting the input jack. The GAIN switch adds 20dB more to the preamp gain. - Page 7 AUTO-TUNE SECTION CONTROLS The Auto-Tune section is designed to have a user interface and functionality that is similar to the Antares® Auto-Tune EFX Plug-in software. Users can select the Key, Scale, and EFX type. Individual notes can be toggled on or off using the Note key pads for more customization.
- Page 8 current Preset. The Preset LED will flash momentarily to let you know that the new settings are being stored. The state of the BYPASS switch is also saved with the pre- set information so any preset can be recalled in bypass mode. The PRESET switch and 5 Preset LEDs are designed to enhance live operation.
-
Page 9: Warranty Information
2) If you believe the ART unit is at fault, go to www.artproaudio.com. You may contact Customer Service for more assistance, or directly request a Return Authorization for service in the “resources”... -
Page 10: Specifications
44.5mm x 150mm x 165mm Weight: 2.5 lbs. (1.14 kg) Note: 0 dBu = 0.775Vrms ART maintains a policy of constant product improvement. Therefore, specifications are subject to change without notice. Go to www.artproaudio.com for the latest information and on the Auto-Tune Pre. - Page 12 www.artproaudio.com E-mail: support@artproaudio.com Copyright © 2013 Applied Research & Technilogy Auto-Tune Pre 183-5004-100...