3 WORK
3.25
3.26
3.27
3.28
38
Installing the engine guard (All Six Days models, 300 EXC TPI ERZBERGRODEO EU)
H01638-10
Opening 2-stroke oil tank cap
E00861-10
Closing 2-stroke oil tank cap
E00861-11
Adding 2-stroke oil
Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
1
Fold loop
upward.
–
Turn the 2-stroke oil tank cap counterclockwise and pull it up.
–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
1
Fold loop
down.
The 2-stroke oil tank cap engages.
–
Open 2-stroke oil tank cap. (
1
.
M6
10 Nm (7.4 lbf ft)
p. 38)