KTM 250 XC TPI 2020 Setup Instructions page 37

3.20 Installing front fender
3.21 Removing the headlight mask with the headlight
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
V00341-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
V00340-11
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Detach the brake line and wiring harness from the headlight
mask.
–
Loosen rubber strap
swing it forward.
E00899-10
(All EXC models)
–
Detach plug-in connectors
mask with the headlight.
E00900-10
1
M6 10 Nm (7.4 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 37)
1
. Slide the headlight mask up and
2
and take off the headlight
WORK 3
.
p. 36)
35