Advertisement
(All EXC models)
–
Remove connector
signal wiring harness.
S03672-10
–
Insert the black and violet cables of bulb included in the
separate enclosure into the socket and position it in the
turn signal indicator lamp.
S03673-01
–
Position the turn signal on the headlight mask on both
sides, mount nuts with washers and tighten.
–
Join plug-in connector
violet and brown cable colors of the turn signal cable har-
ness.
–
Connect the plug-in connector
using the black and brown cable colors of the turn signal
cable harness.
–
Join plug-in connector
S03677-10
–
Connect plug-in connector
–
Secure turn signal relay
the connector.
–
Install the headlight mask with the headlight. (
–
Remove the air filter box cover. (
–
Remove the rear left side cover. (
6
from the bracket and join with turn
7
of the left turn signal using the
8
of the right turn signal
9
of the headlight.
bk
of the turn signal switch.
bl
with a cable tie and plug in
p. 33)
p. 34)
SETUP 2
p. 36)
11
Advertisement
