3.7
Checking throttle cable routing
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
E00881-11
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line using
compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and connect plug-in connection
the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Attach fuel tank breather hose
–
Plug in connector
S03486-10
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank. (
2
with the collar bushings.
M6
10 Nm (7.4 lbf ft)
4
.
5
for the fuel pump.
p. 20)
p. 19)
p. 20)
WORK 3
3
for
23