–
Mount the washer and splint
S03695-10
–
Position the frame protectors on both sides.
–
Hook in the frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screws
Guideline
S03696-11
Screw, frame protec-
tor
–
Mount the cable ties.
(All Six Days models, 300 EXC TPI ERZBERGRODEO EU)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Make sure that the reflectors are glued on to the left and right
fork leg.
Info
The reflectors must not be covered by trim parts.
–
Attach the stickers included in the scope of supply (optional).
–
Set the kilometers or miles. (
–
Adjust combination instrument function. (
–
Set the clock. (
–
Add 2-stroke oil. (
H02556-01
–
Refuel. (
p. 40)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining plastic packaging, corrugated card-
board, and other packaging material.
–
Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
cn
.
J
.
co
.
M5
3 Nm (2.2 lbf ft)
cp
with the washers.
M5
3 Nm (2.2 lbf ft)
p. 38)
p. 41)
p. 42)
p. 42)
p. 38)
SETUP 2
17