Table of Contents
Advertisement
Ф Ванегу
6) Upper level mark
@ Lower level mark
Battery removal and installation:
The battery should be removed for pro-
longed storage, or for recharging if elec-
trolyte specific gravity falls below 1.200
@ 68° F (20°C).
1. Remove
battery
retainer
and
dis-
connect
the ground (—) cable con-
nection first and then the positive (+)
cable. The battery can now be lifted
70
from its mounting. Note the posi-
tioning of the cables, protective rubber
(+) terminal cover and battery mount
rubber pads as well as the routing of
the battery vent tube. Before installing
the battery, clean the battery and its
mounting area with water. Baking soda
and water can be used to remove any
existing corrosion.
2. Battery installation is performed in the
reverse
order
of removal. Pay par-
ticular attention to the battery rubber
mounts
pads
and
the
vent
tube
routing.
Connect
the
positive
(+)
terminal with the rubber insulator first
and then connect
the negative (—)
terminal.
CAUTION:
When installing the battery, be careful
not to bend or twist the vent tube.
Advertisement
Table of Contents
