Table of Contents
Advertisement
the links are either worn ог kinked and
binding. Kinking and binding can fre-
quently be eliminated by lubrication.
Worn or damaged drive chain must be
replaced.
"а.
>".
|
G Cotter ріп
G Rear axle nut
@ Index mark
© Corresponding scale
Lock nut
Ф Adjusting bolt
54
3. If the drive chain is found to require
adjustment, the procedure is as fol-
lows:
a.
b.
Remove the rear axle nut cotter pin
®© and loosen the rear axle nut ©.
Loosen the lock nut ($ and turn the
adjusting bolts @ on both the right
and left chain adjusters to increase
or decrease chain tension.
Align
the
chain
adjuster
index
marks @ to corresponding scale
graduations on both sides of the
rear fork.
. Tighten the rear axle nut and secure
the nut with a new cotter pin.
Tighten the lock nuts.
. Recheck drive chain tension.
. Rear brake pedal free travel is
affected
when
repositioning
the
rear wheel to adjust drive chain
tension. Check rear brake pedal free
travel and adjust as necessary (pages
62-63).
Advertisement
Table of Contents
