On Screen Display Infomation - Marantz SR7000 User Manual

When a function selector button or surround mode buttCMi is pressed
VIDEO: Displays the current video source. When DSS/TV,
. LD, DVD. VCR or AUX is selected with the function
selector, both AUDIO and VIDEO shows the same
name,
AUDIO: Displays the current analog audio input source.
DIGITAL: Displays the current digital input source.
SURR-MODE: Displays the current Surround mode as follows:
AUTO. DOLBY, DTS CINEMA. DTS MUSIC. HALL
MATRIX. MOVIE. 5-STEREO . STEREO. S=DIRECT.
or 6CH-1NPUT,
HT-EQ : Displays the current status of the Home Theater-EQ
function as ON or OFF,
VIDEO DVD
AUDIO
DVD
DIGITAL D 1 G- 1
SURR-MODE
AUTO
HT-EQ
OFF
3. MASTER VOLUME CONTROL
Displayed when the MASTER volume is varied or a button of the
remote handset is pressed.
The box display indicates the 0 dB level with a solid box HT.
MASTER VOLUME
When the SLEEP button ® is pressed, the setting on or off and the
remaining time of the sieeptimer function are displayed.
You can change the mode between on. off and the amount of time to
elapse befwe tf^ unit will shut itself off by cycling the SLEEP button ®,
SLEEP TIMER
ON 9 0 m i ti
6. OSD OFF
When OSD button iI3 is pressed, OSD system will be bypassed after
3 seconds.
TTien there is no indication on the TV display.
Press the OSD button
Ezl
again to activate the OSD.
ON SCREEN DISPLAY
- OFF -
4. MUTE
When the MUTE button (© is pressed on the remote control. "MUTE"
will be shown on screen,
Pressing MUTE button © again will clear the display .or adjust the
volume. __
MUT E
17