Table of Contents
Advertisement
CONNECTION CHART (1)
Basic Audio Component Connections
¢ Illustration shows U.S. model.
Accessory T-type FM antenna
Accessory AM
loop antenna
—_
Stretch the antenna out to
its full 'T'' shape, and affix
to a wall, etc.
8
<ARB1234>
oN
Ve
|=
Fe)
Cao)
VA@ OOS
ARN Aled d
©)
i®
> i
| .
Lead wire
Setting Up the AM Antenna
¢ Insert the claw on the bottom of the antenna into the groove in the leg.
e Place the antenna on a level surface and rotate it to locate the
orientation that yields the best reception.
e Use the attachment hole in the leg to screw to wall or other location,
then insert the claw on the bottom of the antenna into the groove
in the leg (fixing the antenna in the direction that gives the best
reception).
CONNECTING
THE POWER
CORD
(For U.S. and Canadian models)
Household electrical outlets are provided with specific polarity, a live
side and a neutral (ground) side. This unit utilizes such polarity in order
to improve sound quality. As shown in the illustration, be sure to insert
the power plug so that its blades match the width of slots in the outlet.
AC wall socket
To AC
wall
in, Long slot is neutral
socket
ny
(ground) side.
: Insert the wide blade
into the ground side slot.
i
|
Precaution regarding installation position of cassette deck.
If the cassette tape deck is installed in the @) positions shown in
the drawing below, it may be adversely affected during playback.
If possible, it's better to install it in the (@) position.
Advertisement
Table of Contents
