Mounting With Mounting Rail - Siemens SIMATIC ET 200eco PN M12-L System Manual

Mounting

6.3 Mounting with mounting rail

6.3 Mounting with mounting rail
Introduction
A suitable mounting rail and profile screws are available as accessories for mounting the I/O
devices.
Advantages of the mounting rail:
• Mounting rail can be cut to size for the application
• No drill holes required for the individual I/O devices
• I/O devices can be easily mounted on the mounting rail by simply screwing in the profile
screws.
Required tools
For the installation you need a screwdriver, suitable for the screws used.
Required screws
For mounting rail
To mount the mounting rail, use screws with a diameter of 8 mm and a length of at least
20 mm.
For I/O devices on the mounting rail
To mount the I/O device on the mounting rail, use the mounting rail screws for the mounting
rail ET 200eco PN M12‑L.
Version
The mounting rail is available in a length of 500 mm.
42
Distributed I/O system ET 200eco PN M12-L
System Manual, 11/2023, A5E48753295-AG